Re: Looking for a tube socket for Gravitar

From: Curtis H. Wilbar Jr. <vector_at_hawkmountain.net>
Date: Fri Jan 24 2003 - 02:01:58 EST

Another possibility... is if the connector has more pins than is actually
wired/used, you may be able to do some surgery and steal a pin from an
unused spot and put it in the spot where the broken one is....

Just an idea... however, it may be all pins are needed.

-- Curt

>From: "Commander Dave" <cmdr-dave@spamcop.net>
>To: <vectorlist@synthcom.com>
>Subject: VECTOR: Looking for a tube socket for Gravitar
>Date: Thu, 23 Jan 2003 19:34:26 -0600
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
>
>Greetings all,
>
>While fixing up my Gravitar, I noticed that the monitor would drop out, but
>if you bumped it the picture would come back. Decided to do a cap kit
>(needed it anyway), but when I pulled of the neckboard, I found one of the
>metal connectors in the tube socket had broken. The tube doesn't have pins,
>but rather a slide type job... never seen one.
>
>Anyway, it don't look like it can be fixed, so I was wanting to know if
>anyone has one of these tube sockets? Or are these common and I could order
>one? Scrap from a TV shop maybe?
>
>All suggestions appreciated,
>-Commander Dave
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Jan 23 23:02:19 2003

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:18 EDT