Re: Connector on HV Focus wire?

From: Christopher X. Candreva <chris_at_westnet.com>
Date: Fri Mar 14 2003 - 11:20:57 EST

On Fri, 14 Mar 2003, Tom McClintock wrote:

> 1. wire is rated for the current
> 2. connector is rated for the current
> 3. the connector is never inserted/extracted when the HV is working
> -------------------------

This is a fully insulated connector, right ? Then:

4) Whatever insulation is on the connector is ALSO rated for the voltage.

THAT is going to be your problem.

==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Mar 14 08:21:05 2003

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:23 EDT