You might want to check what Clay Harrell has found to be good equipment
at: http://www.marvin3m.com/begin/index.htm . He's a PinHead (Pinball
collector) but I've had great luck with his suggestions!
-Al-
> Could the group point me at the best place to look for a good first
> "real" soldering setup, or recommend options. I'm looking for something
> that will work well for re-flows and such on older stuff (Duh, you're on
> Vectorlist) as well as some work on more current consumer electronics.
> (Small SMT type stuff, through-hole)
> I'm ready to stop fighting with the cheap iron I have right now, but
> don't know what features are good/necessary/irrelevant. TIA for all the
> help. =)
>
> The early bird gets the worm, but the second
> mouse gets the cheese.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the ** message body to vectorlist-request@synthcom.com. Please direct
> other ** questions, comments, or problems to
> vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Mar 14 08:59:36 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:23 EDT