RE: Quantum bezel measurement/picture help please

I don't think it will work. The one pictured appears to be one from a
Tempest. I tried fitting a Tempest bezel in place and it wasn't the right
size.

Joe

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Tom McClintock
> Sent: Monday, March 31, 2003 10:38 PM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: Quantum bezel measurement/picture help please
>
> Wouldn't this one work?
>
> http://www.arcadeshop.com/pics/atari-upright-black-bezel.jpg
>
> tm
>
> On Mon, 31 Mar 2003, "joemagiera" wrote:
> >
> > I'm trying to make a home made bezel for a Quantum. I
> > would like to match
> > an original as best I could. If anyone has easy
> access
> > to a Quantum with an
> > original bezel (the cardboard around the monitor) and
> a
> > digital camera, can
> > you please take a couple of pictures and several
> > measurements for me?
> >
> > The picture I would like, is with the front glass
> > removed and game off.
> > Take a picture that would include the full bezel to
> > just beyond where it
> > sits in the cabinet so I can see how it sits on the
> > cabinet. Remember,
> > please don't jam the list with pictures, please send
> > directly to my e-mail
> > below (or post the link on the web to them).
> >
> > There are two sets of measurements I could use. The
> > first set is eight
> > measurements, two from each inside corner of the
> bezel.
> > Measure from that
> > inside corner point of the bezel to the top of the
> > bezel and to the side of
> > the bezel. I just want to get the length of the
> angled
> > piece of cardboard,
> > not the flat part (the flat part is the piece that
> > would be exactly vertical
> > when installed). I hope that makes sense. The second
> > set is a measurement
> > of each of the four sides of the flat part of the
> > bezel. I would like to
> > get the measurement (height and width) of each of
> those
> > 4 flat parts of the
> > bezel.
> >
> > FYI, I suspect that the bezel is symmetrical and that
> > measuring one vertial
> > and one horizontal for each set of measurements I need
> > would be enough.
> >
> > Thanks much!
> >
> > Joe
> > joemagiera@ameritech.net
> >
> >
> ------------------------------------------------------------------
> ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com.
> > Please direct other
> > ** questions, comments, or problems to
> > vectorlist-owner@synthcom.com.
> ------------------------------------------------------------------
> ---------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Apr 1 05:08:02 2003