RE: Quantum bezel measurement/picture help please

No, this bezel is for a Dig-Dug/Centipede type cabinet, not Tempest.
The monitor angle is important.

On Tue, 1 Apr 2003 07:08:30 -0600, Joe Magiera wrote:

>I don't think it will work. The one pictured appears to be one from a
>Tempest. I tried fitting a Tempest bezel in place and it wasn't the right
>size.
>
>Joe
>
>> -----Original Message-----
>> From: owner-vectorlist@synthcom.com
>> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Tom McClintock
>> Sent: Monday, March 31, 2003 10:38 PM
>> To: vectorlist@synthcom.com
>> Subject: Re: VECTOR: Quantum bezel measurement/picture help please
>>
>> Wouldn't this one work?
>>
>> http://www.arcadeshop.com/pics/atari-upright-black-bezel.jpg
>>
>> tm
>>
>> On Mon, 31 Mar 2003, "joemagiera" wrote:
>> >
>> > I'm trying to make a home made bezel for a Quantum. I
>> > would like to match
>> > an original as best I could. If anyone has easy
>> access
>> > to a Quantum with an
>> > original bezel (the cardboard around the monitor) and
>> a
>> > digital camera, can
>> > you please take a couple of pictures and several
>> > measurements for me?
>> >
>> > The picture I would like, is with the front glass
>> > removed and game off.
>> > Take a picture that would include the full bezel to
>> > just beyond where it
>> > sits in the cabinet so I can see how it sits on the
>> > cabinet. Remember,
>> > please don't jam the list with pictures, please send
>> > directly to my e-mail
>> > below (or post the link on the web to them).
>> >
>> > There are two sets of measurements I could use. The
>> > first set is eight
>> > measurements, two from each inside corner of the
>> bezel.
>> > Measure from that
>> > inside corner point of the bezel to the top of the
>> > bezel and to the side of
>> > the bezel. I just want to get the length of the
>> angled
>> > piece of cardboard,
>> > not the flat part (the flat part is the piece that
>> > would be exactly vertical
>> > when installed). I hope that makes sense. The second
>> > set is a measurement
>> > of each of the four sides of the flat part of the
>> > bezel. I would like to
>> > get the measurement (height and width) of each of
>> those
>> > 4 flat parts of the
>> > bezel.
>> >
>> > FYI, I suspect that the bezel is symmetrical and that
>> > measuring one vertial
>> > and one horizontal for each set of measurements I need
>> > would be enough.
>> >
>> > Thanks much!
>> >
>> > Joe
>> > joemagiera@ameritech.net
>> >
>> >
>> ------------------------------------------------------------------
>> ---------
>> > ** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE" in the
>> > ** message body to vectorlist-request@synthcom.com.
>> > Please direct other
>> > ** questions, comments, or problems to
>> > vectorlist-owner@synthcom.com.
>> ------------------------------------------------------------------
>> ---------
>> ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

Steven Gregory
ArcadeShop Amusements
sgregory@arcadeshop.com
http://www.arcadeshop.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Apr 1 08:07:28 2003