Re: G08_105 info (parts list)

From: Tom McClintock <tomm_at_mgcap.com>
Date: Fri Aug 01 2003 - 13:43:39 EDT

Mike Haaland has it on his site (www.mikesarcade.com) and I believe Jon
Raiford has it as well.

tm

Matt Rossiter wrote:
>
> I have a Sega/Gremlin manual that describes in detail not only the G08
> monitor and how it works, but it also goes into detail on how the G80 system
> (xy timing and control) works - plus troubleshooting and adjustment
> descriptions. It has the black cover with the vectory circle in the middle.
> (Manual Part No. 420-0605).
>
> Is this available online somewhere? - If not I can scan it in and make it
> available - if anyone is interested.
>
> Matt
>
> ----- Original Message -----
> From: "Tom McClintock" <tomm@mgcap.com>
> To: <vectorlist@vectorlist.org>
> Sent: Friday, August 01, 2003 8:13 AM
> Subject: Re: VECTOR: G08_105 info (parts list)
>
> > Joe,
> >
> > I added it to the existing G08-105 PDF manual on my site. Now all three
> > of you who want to download it can! ;)
> >
> > http://www.ionpool.net/arcade/sega/g08_105_manual.pdf
> >
> >
> > tm
> >
> > joemagiera wrote:
> > >
> > > I got a screwy message from the server on this post, so sorry if this is
> a
> > > double post.
> > >
> > > Some people were disappointed that when I posted the G08_105 manual a
> while
> > > back it didn't have the parts list. I happened to find that item on an
> op
> > > raid last week (different op!). Since it is just text, I scanned it in
> at a
> > > low resolution to keep the file size small. If it proves unreadable,
> let me
> > > know and I'll scan it at a little higher resolution.
> > >
> > > I don't have permanent web site space, and people don't normally look to
> my
> > > site for techincal info anyways, plus I don't know how long I can keep
> it
> > > out here. So perhaps someone (Tom McClintock?) can grab these pages and
> > > post it somewhere a little more appropriate?
> > >
> > > Anyhow, here you go:
> > >
> > > http://www.joesarcade.com/joem/G08_105_partlist/
> > >
> > > Any questions, comments, problems, etc., let me know.
> > >
> > > Joe
> > > joemagiera@ameritech.net
> > >
> >
> > --------------------------------------------------------------------------
> -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > > ** message body to vectorlist-request@vectorlist.org. Please direct
> other
> > > ** questions, comments, or problems to chris@westnet.com .
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@vectorlist.org. Please direct other
> > ** questions, comments, or problems to chris@westnet.com .
> >
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@vectorlist.org. Please direct other
> ** questions, comments, or problems to chris@westnet.com .

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
Received on Fri Aug 1 13:42:48 2003

This archive was generated by hypermail 2.1.8 : Wed Aug 27 2003 - 12:24:25 EDT