RE: Amplifone 25" tube numbers

That is one tube #. Another that will work is A63ABZ26X. This is a 90
degree tube a may need an Amplifone yoke to look proper - but does look
great with a 6100 yoke! I have found one of these in an old TV!

The 9A2806-001D yoke is probably the fourth revision of that yoke. The
only difference I have found between A, B, and D is the length of the
wires going to the deflection board. I have never seen a C. A and B are
used in the 6100. D is used on the amp 25". The difference is only a few
inches. If you undo the knot in the A or B yokes, it should be enough to
connect to the deflection board in the cockpit. Otherwise make an
extension cable.

Usually tube beginning with A and ending in X seem to be medium res....

JB
www.joesarcade.com/parts.htm

-----Original Message-----
From: Bret Pehrson [mailto:bret@infowest.com]
Sent: Wednesday, September 03, 2003 1:23 AM
To: vectorlist@vectorlist.org
Subject: VECTOR: Amplifone 25" tube numbers

Don't know if these numbers are documented somewhere, but I thought I'd
post
here for anyone that is interested and the archive.

>From 25" SW CP, Amplifone:

  Tube: Rauland A63AAX00X
  Yoke: Litton Triad-Utrad 9A2806-001D 17-8233

---
Bret Pehrson
Classicade
http://www.classicade.com
http://www.vaps.org/members/nv/bret@classicade.com.html
mailto:bret@classicade.com
     *** N O W   S E L L I N G ***
Check out C-POP -- the ultimate overlay protectant and conditioner!
http://www.classicade.com/cpop.htm
Atari Star Wars thumb trigger rebuild kits!
http://www.classicade.com/trigger_kit.htm
     *** N O W   S E L L I N G ***
------------------------------------------------------------------------
---
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
** message body to vectorlist-request@vectorlist.org. Please direct
other
** questions, comments, or problems to chris@westnet.com .
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .