-----Original Message-----
From: "simon" <simonjhanlon@btopenworld.com>
To: <vectorlist@vectorlist.org>
Date: Wed, 11 Oct 2006 23:07:04 +0100
Subject: VECTOR: Omega Race repair
> Today I thought it was time I fixed my Omega Race, I have a few spare boards for it, most with some acid damaged. I found one that was fairly clean and replaced the 2 ram sockets near the battery. On power up the + and - 15v regulators were getting too hot to touch, I checked between the 2 and had a reading of 35 ohms between the-15 and 15v lines. I suspected one of the Op amps or a DAC was to blame. After pulling 3 of the 4 Op amps I found the bad one,
couldnt you find the bad one by burning your finger on it?
that works pretty good with dram a lot of the time.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Oct 11 23:23:33 2006
This archive was generated by hypermail 2.1.8 : Thu Oct 12 2006 - 00:50:01 EDT