-----Original Message-----
From: Doug Hill <doug@grouplogic.com>
To: "vectorlist@vectorlist.org" <vectorlist@vectorlist.org>
Date: Wed, 6 Jun 2007 14:41:13 -0400
Subject: VECTOR: WG6100 HV problems and a deadly deflection board
> Hello gang.
>
> I'm a relative newbie when it comes to working on these X-Y monitors. I've recently got one of them working and I'm working on #2 which is having some issues I need help with.
>
> Basically it was DOA when I got it so I installed a LV2000 and Zanen kit including the "upgrades" recommended in the 6100 FAQ. Presto - worked fine for a few weeks in a Tempest then dead with no HV. That is, there was no crackle as you switch the unit on. I had left it on over night so I never saw what happened but the game plays blind and you can hear the loud yoke chatter.
>
> I had an extra HV cage so I switched it out and the monitor was back in action. However, there was an intermittent "clicking" coming from the HV area - actually it seemed to be coming from behind the SCREEN/FOCUS knobs.
check the wiring behind the focus/screen pots - they break off under the rubber covers.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jun 7 02:00:07 2007
This archive was generated by hypermail 2.1.8 : Sat Jun 09 2007 - 00:50:01 EDT