On Wed, 12 May 2010, John Huie wrote:
> When it's playing blind I have deflection chatter. Spot killer is off. But...my B+ has dropped from 180
> back down to 24 volts. Which is right where it was before I "fixed" it by replacing the zeners. I can
> replace them again. They are about 25 cents each so no big deal. But....not sure if that would help and
> even if it does something else seems to be wrong since these are brand new.
You may be running borderline on the HV. I believe the K6100 has an
over-voltage proteciton circuit that chuts down the monitor if the HV is too
high.
Did you adjust the high voltage after the rebuild ?
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 948-3162
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed May 12 22:59:50 2010
This archive was generated by hypermail 2.1.8 : Mon May 17 2010 - 17:50:00 EDT