Re: K6100 D901 replacement

From: Ken Sumrall <k_lists_at_scrapheap.net>
Date: Thu Oct 13 2011 - 19:32:29 EDT

The manual parts list says the original part is an ERC27-13, which according to
a data sheet I found at datasheetarchive.com has a max reverse voltage of 1300
volts, so a 1400 volt part should be fine.

___
Ken

On 10/12/11 22:36, David Shoemaker wrote:
> I was looking for a replacement for this diode and found a reference to Bob
> Roberts having FR156 (NTE506) as a replacement.
>
> I found a data sheet for FR156 which lists the voltage as 1500v, the data sheet
> for NTE506 also lists 1500v. I bought a couple and the package says 1400v.
>
> Not sure why they have changed from what the data sheet says but before I go
> putting them in I was wondering if the 1400v part is going to be enough?
>
> Anyone know?
>
> Thanks,
>
> David
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Oct 13 19:32:41 2011

This archive was generated by hypermail 2.1.8 : Thu Oct 13 2011 - 21:50:00 EDT