Can you make the text align OK, disregarding the geometry of the
diamond pattern?
I had a few games that did just that, perfect diamond or perfect
text but never at the same BIP settings. In all cases one of the the
AM6012 DAC's was defective. I would guess that if this is the case
your Y DAC looks suspect. If the DAC is bad enough, it can distort
the reference current sources output, thereby affecting the X output
as well.
- Mendel
On 29-12-2011 21:44, Kevin Moore wrote:
Thanks for the input. But looking at the screen, I've
adjust the bip to move the diamond pattern to touch the edges of
the box. Wouldn't that also adjust any text problem.
If you look at the text it is in line, but the curved sections of
the just B and D are wrong, kind of like the scale is messed up in
the alphanum for those two specific letters.
Unless I'm not understanding how the bip works which is highly
possible.
Kevin
On Thu, Dec 29, 2011 at 9:43 AM, Mendel
Pearl
<mypearl@dds.nl>
wrote:
Your BIP
adjustment is way off. If you cannot correct the problem using
the BIP adjusts on the game PCB, your 6012 DAC or DAC
reference current input is suspect.
- Mendel
On 29-12-2011 1:48, Kevin Moore wrote:
Put the BZ on hold and put a Red Baron on the bench.
Sorry for the backwards picture. For some reason when
this analog board draws the letter B and the letter D
the scale is off and it drops the text down to the last
place drawn. Kind of like going to the next line.
Thanks,
Kevin
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com