Back in the day a lot of LLs were converted to Ast with a board swap and a new CP.
Verify the pinouts first, but you can probably drop an Ast. board in there as a pattern gen. with little to no effort.
-Mark
On May 15, 2012, at 7:15 AM, Kevin Moore <talon.k@gmail.com> wrote:
> So I'm working on a LL with an 801 in it. My first 801.
>
> Come to find out the linear pots have been messed with on the deflection board, causing a horrible picture and walling about 2" from the edge of the monitor.
>
> Normally this wouldn't be an issue because most games have a Diamond test pattern to adjust to. LL does not. :(
>
> So I'm wondering if some creative person has made a rom set for a LL board set that only displays test patterns. Since this is my only 801 I can't easily swap the monitor to a game that can produce a test pattern.
>
> Kevin
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue May 15 08:29:12 2012
This archive was generated by hypermail 2.1.8 : Wed May 16 2012 - 10:50:03 EDT