Re: Messed up my Black Widow

I wouldn't think it would be a from short as power stays up on his second
board set. Sounds like he's just got video out issues with the second.

Could be a shorted component though like a cap.

Would be interesting to see if +5 stays up with the rooms removed though.
On Jul 1, 2012 5:31 PM, "vectorlist-steve" <vectorlist@arcadehacking.com>
wrote:

> Oh, you definitely have a short then. For comparison I measured 1.57 K
> ohms on two different working board sets.
>
> Pull all of your roms and measure the resistance of the board again. If
> it jumps up to ~ 1.5K then measure each of the roms/eproms and see if you
> can lock down which one is causing you grief. It could also be a fault
> socket that has disintegrated with recent use.
>
>
> On 7/1/2012 3:23 PM, John Huie wrote:
> > Well I tried using my ohm settings and it's extremely close to no
> resistance at all: 0.000 on my meter.
>
> ------------------------------**------------------------------**
> ---------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jul 1 18:36:45 2012