Seconded, 3000u here too, brilliant bit of kit. I did have to fix it at
one point, there's a fairly common chip used for driving programming
voltage which can go bad.
> I'd recommend anything made by xeltek, they will even add devices for
> you if you send 3pcs and pay a small fee.
>
> I've had a Superpro 3000u for years, best programmer I've ever owned.
>
> http://www.xeltek.com/
>
> Cheers,
> Craig
>
>
> On 07/12/2012 02:47, Gary McTaggart wrote:
>> Nevermind. Will burn TMS2532A with the latest software.
>>
>>
>> On Thu, Dec 6, 2012 at 6:31 PM, Gary McTaggart
>> <gary.mctaggart@gmail.com <mailto:gary.mctaggart@gmail.com>> wrote:
>>
>> The GQ-4X won't burn TMS2532A eproms, but will burn TMS2532
>> apparently. Just ran into this. :(
>>
>>
>> On Wed, Dec 5, 2012 at 10:19 AM, John Robertson <pinball@telus.net
>> <mailto:pinball@telus.net>> wrote:
>>
>> Andre Huijts wrote:
>>> http://www.batronix.com/shop/programmer/BX32/eprom-programmer.html
>>>
>>> Looks a lot better quality than any of the Willem-stuff from
>>> the far-east.
>>> I know these do the trick, but what I like about this one:
>> ...
>>
>> I am looking at these programmers - sold locally (to me) here
>> in Vancouver, BC, Canada (west coast of).
>>
>> http://www.mcumall.com/comersus/store/comersus_dynamicIndex.asp
>>
>> Anyone play with one? I like the range of devices and that it
>> is powered and programmed by the USB port alone, not like the
>> other Willem programmers that need a parallel port for the
>> data and the USB port is only used for power.
>>
>> May try to visit with the distributor next time I am in their
>> area - only about ten K east of me.
>>
>> John :-#)#
>>
>> --
>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
>> Call(604)872-5757 <tel:%28604%29872-5757> or Fax 872-2010
>> (Pinballs, Jukes, VideoGames)
>> www.flippers.com <http://www.flippers.com>
>> "Old pinballers never die, they just flip out"
>>
>>
>>
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Dec 11 08:38:32 2012
This archive was generated by hypermail 2.1.8 : Tue Dec 11 2012 - 08:50:00 EST