How's the B+ look?
On Sat, Feb 8, 2014 at 9:14 PM, Joel Griffin Dodd <griffindodd@gmail.com>wrote:
> Hi all.
>
> Trying to repair the 6100 in an Atari Space Duel I picked up.
>
> Did a Bob Roberts kit on the HV and an LV2000 on the deflection with
> replacement caps and replacement transistors on the chassis. The deflection
> powers up on its own and voltages on the LV2000 test good.
>
> With everything assembled the monitor powers up for about 2 seconds and
> then the HV box makes a click and the + 26v LED on the LV2000 goes out,
> this happens about 1 second after the spot killer led at D800 turns off on
> power up. Even after the click I still have the white spot of doom on the
> tube and neck glow but no picture. Game plays blind and fine.
>
> I can repeat this process by powering off and back on again. No fuses are
> blown
>
> Prior to the rebuild the monitor had burned out the LV area of the board.
>
> Looking for suggestions at this point.
>
> Thanks
>
> Joel
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Feb 8 22:38:21 2014
This archive was generated by hypermail 2.1.8 : Sat Feb 08 2014 - 22:50:00 EST