Re: 6100 help

Have to admit I missed checking that, doh! How do you do it on a 6100
On Feb 8, 2014 7:40 PM, "Jimmy Ipock" <jipock@gmail.com> wrote:

> How's the B+ look?
>
>
> On Sat, Feb 8, 2014 at 9:14 PM, Joel Griffin Dodd <griffindodd@gmail.com>wrote:
>
>> Hi all.
>>
>> Trying to repair the 6100 in an Atari Space Duel I picked up.
>>
>> Did a Bob Roberts kit on the HV and an LV2000 on the deflection with
>> replacement caps and replacement transistors on the chassis. The deflection
>> powers up on its own and voltages on the LV2000 test good.
>>
>> With everything assembled the monitor powers up for about 2 seconds and
>> then the HV box makes a click and the + 26v LED on the LV2000 goes out,
>> this happens about 1 second after the spot killer led at D800 turns off on
>> power up. Even after the click I still have the white spot of doom on the
>> tube and neck glow but no picture. Game plays blind and fine.
>>
>> I can repeat this process by powering off and back on again. No fuses are
>> blown
>>
>> Prior to the rebuild the monitor had burned out the LV area of the board.
>>
>> Looking for suggestions at this point.
>>
>> Thanks
>>
>> Joel
>>
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Feb 8 22:41:38 2014