Re: (Hopefully) simple Battle Zone problem

From: Gregg Woodcock <woodcock_at_fastlane.net>
Date: Mon Oct 19 1998 - 20:53:20 EDT

-----Original Message-----
From: Mitchell Rohde <bovine@eecs.umich.edu>
To: vectorlist@mcfeeley.cc.utexas.edu <vectorlist@mcfeeley.cc.utexas.edu>
Date: Tuesday, October 13, 1998 9:41 PM
Subject: Re: (Hopefully) simple Battle Zone problem
>> Almost all heat-time (warmup) related problems are bad solder joints on
the
>> connector pins.
>>
>
> Hmmm... not to contradict a master, but does that make sense?
> Wouldn't "heat up" problems tend to indicate something in a
> component with a higher probability than a cold joint?

In my experience, FOR THESE MONITORS, no.
Received on Tue Oct 20 17:27:19 1998

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:42 EDT