Re: Electrohome G08 question

I suppose someone may have put in the wrong value
(too low) yoke return resistors, but a more likely
possibility is that the high voltage is set too low and
the picture is "blooming". If you have a high voltage
probe that is easy enough to check.

Matt Rossiter - Verio Southern California wrote:

> I have an Electrohome G08 monitor that is putting out a picture too large.
> The x and y size pots are as low as they can go. I've put in new x/y size
> pots as a matter of fact. All the voltages I'm reading are pretty good.
> I know the signals coming out of the x/y game boards are good.
>
> I've kind of solved the y-size problem by putting in a slightly larger
> potentiometer. Putting a slightly larger potentiometer in for the x-size
> doesn't solve the horizontal problem - besides it's probably cheating.
>
> This particular G08-003 monitor doesn't have the input protection board -
> but I'm not sure if that would effect the size problem.
>
> Anyway - I'm stumped. I have a few other ideas to try, but maybe someone
> could offer me suggestions.
>
> Thanks...
>
> Matt
Received on Wed Apr 21 04:32:51 1999