WG 6100 Deflection Board Problem

Here's another xy monitor problem(deflection PCB)I
have been fighting for some time.One half of my screen
is working perfectly,The other half is nothing but
squiggly images.On a tempest it would be the right
half of the screen if you were looking straight at
it.I believe it is the X-Amp section.I put a zannae
kit on it,I have replaced the two biggest caps and
Q100 and q101,I have replaced most of the resistors
and diodes and transistors in the X-Amp section.I have
replaced the 4 heat sink transistors along with the 4
big disc caps in the X-amp and Y-amp sections.I have
also replaced the 2 White ceramic resistors in the
X-Amp and Y-amp section.It still has this problem.I
tested the monitor with a good deflection board and
the picture is perfect.Any ideas would be great.
                         Jerry.

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Aug 28 20:28:44 2001