Re: Star Wars Amplifone tube beeping!

From: John Robertson <jrr_at_flippers.com>
Date: Mon Sep 17 2001 - 14:46:50 EDT

Beeping indicates most likely a MPU board problem. Try disconnecting the
monitor and listening for game sounds when you "coin" and "start" the game.
If you don't get any then the MPU has problems, break out the manual and
try the self tests listed there.

John :-#)#

At 11:24 AM 9/17/01, you wrote:
>I left it on for a few hours and when I came back the spot killer LED was
>blinking in sync with a beeping which to my surprise sounds like it's coming
>from the neck of the monitor. About once per second.
>The red HV has been replaced with a Wintron and all was working well until
>yesterday. Tried new deflector board transistors but still it beeps (and no
>picture)
>Any thoughts?
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Sep 17 11:52:37 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:41 EDT