Re: 6100 zener diode mod advice?

I like to add all of the mods that offer any degree of improvement to
reliability or functionality. The diodes on the back of the board, shown in
the Atari conversion instruction booklets, show both the P314 and P327
boards with the diodes installed.

I have taken some photos and posted them on my site for anyone who wants to
see what it looks like all finished. See here:
P314: http://www.biltronix.com/wg6100_mod_back_diodes_p314.html
P327: http://www.biltronix.com/wg6100_mod_back_diodes_p327.html
The parts table is indentical in both pages. Only the pics are version
specific.

William Boucher

----- Original Message -----
From: "Total Impulse" <totalimpulse@comcast.net>
To: <vectorlist@vectorlist.org>
Sent: Tuesday, October 06, 2009 6:04 PM
Subject: Re: VECTOR: 6100 zener diode mod advice?
>
> To rephrase my original question...
> When faced with an unmodified P314 deflection board, do people here leave
> it alone, or add the zener diode mods to it? If so, which mod do you
> install?
>
> Alan
> --
> Total Impulse - Just Having Fun!
> Alan Estenson, totalimpulse@comcast.net
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Oct 6 21:51:17 2009