Re: K6100 Focus

Rodger Boots wrote:
>
> Seeing that it worked before you overhauled it (didn't it?) check that
> you put all electrolytic capacitors in correctly. A reversed one
> could cause this.
>

Most of us here are way to polite to mention this (ducking- ouch!)...

John ;-#)#
> On Jul 6, 2012 9:18 AM, "Chuck" <chuck@localsurfer.com
> <mailto:chuck@localsurfer.com>> wrote:
>
> Anyone? Still lost on this one.
>
> Chuck
>
>
> On Jul 4, 2012, at 10:48 PM, Chuck wrote:
>
> > Hey all,
> > I have a K6100 from my Tempest that I did a full rebuild
> on with all the bells and whistles from Bob Roberts. All seems to
> have went well except that it now will not stay in focus. I tried
> swapping out the flyback with another one and the problem is still
> there. I have looked at the pins and socket on the neck and neck
> board and they all seem to fine, no signs of corrosion. The
> connector that goes from the high voltage cage to the neck board
> is not at issue as far as I can tell, there isn't any changes when
> I wiggle it around. The weird part is that when I turn the game on
> it is perfect for a couple of minutes and then drifts out of focus
> to about the same point all the time. I thought it might be a heat
> problem, but if I turn the game off for just a few seconds and
> right back on, it is in good focus again for a couple of minutes.
> No time for it to cool off. I miss playing my Tempest.
> >
> > Thanks,
> >
> Chuck---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to
> chris@westnet.com <mailto:chris@westnet.com>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com <mailto:chris@westnet.com>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Jul 6 20:19:33 2012